The Best Cleaner
“The Masters”® removes oils, acrylics, watercolors,
stains, and varnishes. And it helps prevent paint build-up in
the ferrule. It also prevents the hardening and build-up so
common with today’s acrylic paints.
“The Masters”® works beautifully on the finest
sable and bristle brushes, and it makes painting with nylon
and synthetic brushes a snap. It conditions the brush to hold
more color and helps lay down a smoother more even flow. Use “The
Masters”® after every session to keep your brushes
like new.
The Best Preserver
“The Masters”® was formulated in conjunction
with a cosmetic laboratory to help condition and preserve your
brushes with the same care and thought as products that you
use on your hair. It keeps your brushes like new so they’ll
retain the same natural snap and luster - for consistent performance
- as the day you bought them.
The Best Restorer
Don’t throw away old brushes with dried-on oil paint,
no matter how hard the bristles are. “The Masters”® restores
old, stiff brushes to like new condition. Simply wet with
water, swirl, lather and let brush sit a while before rinsing.
Repeat process until all the paint is removed. Your brushes
will be reconditioned and you will have a new old brush. |
For Cleaning
1. Wipe brush to remove excess paint.
2. Wet brush and/or “The Masters”® with water.
3. Swirl brush in “The Masters”® and work
into a lather.
4. Rinse with clean water.
5. Repeat if necessary until brush is clean (lather will be
white).
You can clean one color after another without removing the
previous colors from “The Masters”® first.
For Preserving
1. Clean brushes as above
2. Leave clear lather on bristles, shape and allow to dry.
3. Shake powder off bristles when ready to use again.
For Restoring
1. Clean brush as above, but use hot water.
2. Allow lather to remain on bristles for a few minutes.
3. If necessary, tap bristles on hard surface to work paint
out.
4. To clean paint from ferrule, allow lather to remain on
the
bristles for several hours, and repeat cleaning process.
5. Leave clear lather on bristles, shape, and allow to dry.
|